1 / 9
ZGB25RP Motor Housing for fischertechnik — image 1
1 / 9

ZGB25RP Motor Housing for fischertechnik

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Housing for ZGB25RP DC motor with eccentric shaft for fischertechnik The end caps can be used for both the (eccentric)…

Rating
0 / 5
Likes
2
Downloads
22
Makes
0
Views
154
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Housing for ZGB25RP DC motor with eccentric shaft for fischertechnik

The end caps can be used for both the (eccentric) ZGB25RP and (centric) JGA25-370 DC motors. The fischertechnik plugs directly contact the small brass lips on the motor, but the cap can also be used if you solder the wires on. The heights of the gear boxes differ slightly. Almost all RPM's I tried (100, 150, 300, 360, 400, 500) are best covered with the 13mm end cap, but the gear box on the 22 RPM ZGB25RP tend to be 2 mm higher, so use the 15mm variant for that one if you want to close the gap.

UPDATE may 2022: Added two more cap-depths (16.4mm and 17.3mm) to accommodate the lengths of the JGA25-370 motors with 10RPM (needs 17.3mm) and 100RPM (needs 16.4mm cap). These may also be used with the ZGB25RP motor.

Category: Robotics

Tags