The Mini Mighty Wall Hook
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.64 – €0.78 net (excluding VAT)
For file: Wall Hook_0.15mm_PLA_MINI_54m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.71 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 54 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A small hook intended to be mounted to the wall with two screws, prints with minimal filament, and is quite mighty!
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 71
- Makes
- 1
- Views
- 440
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
The Mini Mighty Wall Hook
This model is just a small wall hook that was designed to print quickly and with minimal filament consumption. It may not look fancy, but it can hold an impressive amount of weight! Using just PLA, I've gotten it to hold up full gallons of milk!
A better use for this print would be for bath towels or coats. It can hold two items, so maybe even a coat + hat combo!
Print Settings
I did 35% infill with lines and 4 walls to ensure a sturdy print if using PLA. It's possible other, stronger materials may not need as much infill. I also chose 0.15mm layer height, so it's possible larger layer heights would create a sturdier part as well.
Happy printing!