Battery Mockups
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a AA battery mockup designed to replace AA batteries with an external power source.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 211
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an AA battery mockup designed to replace AA batteries with an external
power source. You will need 2 one-sided PCB pieces. One with a 5 mm diameter
and another one with a 9 mm diameter. You will need to print 2 body and attach
one PCB piece at the end of each one. The 5 mm PCB piece will act as the
negative pole, while the 9 mm one as the positive pole. Some glue is needed to
attach the PCB pieces to the end of the battery mockups. You will also need a
soldering iron. You will need to solder a wire to each PCB piece.
Support material is not required. An infill of 20% is recommended.
This object main web page is:
http://www.ctheroux.com/battery-mockups/.
This object was designed using Solid Edge Community Edition.
You can request the source files on the page listed above.