Tilt stand for DPS5005 case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a somewhat parametric tilt stand for a DPS5005 power supply case like this one:…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 62
- Makes
- 0
- Views
- 951
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a somewhat parametric tilt stand for a DPS5005 power supply case like this one:
https://www.amazon.de/gp/product/B077NZF6DZ
The included STL has a 17° angle, and 15 mm extra vertical lift, which is perfect for my case. The OpenSCAD files are included, so it should be easy to adjust that to your needs.
Print instructions
You want to print two feet. Carefully insert the M3 hex nuts into their traps. Such a “parrot” tool does that nicely …. ;-) Then fix the feet to the case body using M3x10 screws. The holes are already in the case body.