Itty Bitty Fidget
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.19 – €0.23 net (excluding VAT)
For file: MK4IS files / 3x3-magnets_pla_11m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.21 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 11.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A super tiny sliding fidget that uses less than 1.5m of filament.
- Rating
- 4.871 / 5
- Likes
- 3,798
- Downloads
- 13,365
- Makes
- 414
- Views
- 63,084
- Reviews
- 325
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
This incredibly tiny fidget uses less than 1.5m of filament.
It's available in the following versions:
- 3x3 Magnets
3x3mm cylinder magnets
Softest click with an optional middle setting.
- 4x2 Magnets
4x2mm cylinder magnets
Soft click with an optional middle setting.
- 6x3 Magnets
6x3mm cylinder magnets
Recommended configuration with a strong click.
- 7x2 Magnets
7x2mm cylinder magnets
- 8x3 Magnets
8x3mm cylinder magnets
- 10x3 Magnets
10x3mm cylinder magnets
- No Magnets
No hardware required
- No Magnets V2
No hardware required, stays clicky longer
- Template
Use this to remix your own customized fidgets
Printing
This model is very small and requires accurately printed clearances to work as expected.
Print slowly and avoid brittle or inconsistent filaments.
Assembly
If assembling a magnet version of this fidget, press fit the magnets into the button and bottom case first. Make sure magnets are oriented to pull the button toward the bottom case. If the magnets are loose, glue them in.
The top and bottom pieces snap together. These snaps are very tight, so they may require some force to work.
Gluing the case shut is not recommended. If you do glue the case together, limit the glue to only the ends of the case. This is particularly important if you're printing the no-magnet version, as the case needs to flex slightly at the middle.
Magnets? Where?
Magnets are incredibly useful, so buy them in bulk. You will use them if you have them.
- 6x3mm magnets: https://www.amazon.com/dp/B07873ZCY4
- 3x3mm magnets: https://www.amazon.com/dp/B075PLVW8W
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.