Toggle Switch Plate - Atlas 7B Shaper
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.31 – €1.60 net (excluding VAT)
For file: s7-122-switch-plate-06-on-up_025n_007mm_pla_col.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.46 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 2.14 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
There are very few people who will need this particular switch plate as it is a replacement for a part on a decades…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 106
- Makes
- 0
- Views
- 484
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
There are very few people who will need this particular switch plate as it is a replacement for a part on a decades old piece of machining equipment. However, it may be useful generally as an example of what is possible. This is printed in two colors of PLA.
I made this for an acquaintance who was missing this part. For comparison, I included a photo of the original plate; note that on the original "OFF" is up which is not the typical orientation in the US today (so I switched this - pun intended - in the 3D print).
In addition, the mounting holes are countersunk so that flat head or oval head screws can be used (the original much thinner plate uses round head screws).
Print instructions
The switch is designed to be printed in two different colors. The included gcode has instructions for pausing and changing filaments. Obviously, the black background is printed firstl the filament is then switched to silver for the text and border.
Set perimeters to 20 and fill pattern to concentric for best appearance.
The OnShape 3D CAD file can be found here: