Secondary drive gear for Schmidling Maltmill
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Schmidling Maltmill replacement for the 30 tooth Gear Drive Option spur gear
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 269
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I lost the secondary spur gear for my Schmidling Maltmill in a cross country move, making my Gear Drive option just a passive roller. The Gear Drive Option is/was great, turning one roller slightly faster than the other, not only crushing but shredding the grains and increasing efficiency for my brew days.
Schmidling closed its doors a couple years ago, but owner Jack replied to an email inquiry I had about spare parts. He not only provided the part numbers, but suggested an industrial supply shop and a machine shop, neither which have replied to my queries (so far).
So, while I wait, I decided to model my own as a temporary fix.
There is a pilot hole if you want to drill out or tap a screw or bolt in as a set screw. One version also has a… reverse of a notch(?) or a flat edge to the bore, to fit the cutout on the roller axle as well.
Printed with .2 layer height, 50 top and bottom layers, 8 walls printed to print solid.
With the tooth count, pitch degree, and a couple informed guesses I whipped up this model with a spur gear online calculator, inkscape, and tinkercad.
Thanks again to Jack for replying to my emails for all the info I needed.
https://media.giphy.com/media/Oyk9WXWyLrJqQRWDfA/giphy.gif
Maltmill page http://schmidling.com/maltmill.htm