Flash Drive Holder - Modular +++
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.58 – €0.71 net (excluding VAT)
For file: module-t5-2x5-usd_02mm_pla_mk3s_45m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.64 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 44.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
[Additional model files added Feb. 10, 2020] [Additional file added for microSD card module Apr.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 248
- Makes
- 2
- Views
- 1,809
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
[Additional model files added Feb. 10, 2020]
[Additional file added for microSD card module Apr. 30, 2020]
This is for holding flash drives and SD cards and whatever. I believe this has some advantages over other designs:
- holds odd shaped flash drives
- drives easily removed or added
- expands to be as large as you need it - just add more modules
- customize to your needs with different types of modules
In the cover photo you can see some of the options: Back row raised by using half-height modules under full height modules; variety of drive styles easily accommodated, four different modules in use.
About the file names:
The file names relate to the "basic module" which is 0.640"W x 1"D x 1"H. Therefore
Module_T5_1x1... is a basic module
ModuleT5.5x1... is a basic module but 0.5" high
ModuleT5.5x2... is a 0.5" high double width
. . . and so on.
Additional module sizes are easily made using the 3D CAD files.
OnShape 3D CAD files available here:
Print instructions
Printed in PLA on MK3/S
For best results:
0.20mm Quality
0% fill density