Controller Stand for DualShock 3 with integrated usb hub
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a stand for 2 ps3 DualShock3 controllers with integrated usb hub. Im using a cheap (from ebay) usb 4 port hub…
- Rating
- 4 / 5
- Likes
- 19
- Downloads
- 80
- Makes
- 1
- Views
- 1,622
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a stand for 2 ps3 DualShock3 controllers with integrated usb hub.
Im using a cheap (from ebay) usb 4 port hub - (last photo) to connect my controllers dongle.
Assembly -
1 disassemble your usb hub
2 check if the down side of the PCB is flat, if its not you can make changes on the base of the stand. (if you cant make the changes in the file, you can press fit it in the base and heat the down side with a heat gun or soldering iron)
3 print all parts
4 glue the hub`s pbc to the base of the stand in the recces.
5 glue the top 3d printed part of the hub on to the base
6 glue the stands to the base over the hub and the 2 platform for the controllers
7 enjoy :)
this stand is a remix of an original from https://cults3d.com/en/3d-model/gadget/ps3-controller-holder
also here are the buttons of my Aftermarket PC controller buttons (for DualShock 3, DualShock 4 - knockoff / xbox pc layout) https://www.thingiverse.com/thing:4039456
enjoy and happy printing
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
20
Filament: 3d jake PLA black
Notes:
print the usb hub cover first to make sure it till fit the hub
Category: Other