1 / 5
Miniture Sanding Block
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small sanding block for those difficult to reach areas
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 82
- Makes
- 1
- Views
- 640
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I created this quickly to help sand those difficult areas and acute angles of models i was making
2x M3 bolts
2x M3 nuts
Assembly Steps
Use images for reference
- Cut a strip of sand paper 10mm wide
- Fold around sanding block
- Insert screws through one retainer piece, ensuring correct orientation. Stepped side of part should face the sandpaper
- Push the retainer and screws through sanding block hole (thinner side of retainer)
- Fix 2nd retainer on the other side of sandpaper
- Finger tighten nuts to hold in place
- Sand!
Print Settings
Print without supports
Filament Used: 1.12m