Hammerhead Karoo2 Mount Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.41 – €0.50 net (excluding VAT)
For file: Karoo2 Mount_0.2mm_PETG_MK3S_33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.46 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 33 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Clamp for the Hammerhead Karoo2 mount.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 99
- Makes
- 1
- Views
- 635
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
A few months ago the clamp of my Hammerhead Karoo2 mount broke.
Without being able to find spares to purchase, I measured it and whipped up a replacement.
~I have printed mine in PETG, which gives it a nice springiness and should resist the elements well.~
The PETG version didn't hold very well. It worked for a city ride but I'm not sure how it would fare in worse terrain. I have now printed it in ASA (ABS should work about the same) and it's much better. It doesn't click when it snaps but it stays in place well.
Although it doesn't feel as stiff as the original, it snaps nicely and the unit doesn't move or rattle.
I have included a STEP file and the Fusion3D model.
I used M3x3 inserts for the screws, lodged into place using a hot soldering iron.