1 / 5
Alternative hotend fan and part cooling duct for Ender 5/Pro/Plus MicroSwiss Direct Drive
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hotend and part cooling fan for the MicroSwiss Direct Drive. It is tight in the X direction but you wont loose any…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 1,125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Hotend and part cooling fan for the MicroSwiss Direct Drive.
It is tight in the X direction but you wont loose any build volume, Y is at 46mm not larger than stock.
BL-Touch location:
X: +8mm
Y: -23mm
Stuff needed
- 2x 50x50x15 Fans
- 6x M3x5 (if you dont have these M3x8 will work too)
- 2X M3 insert (I used Ruthex if you have something else you may want to adjust the hole size for the part cooling duct)
- 2x M4x23
- 2X M4 nut
- Screws you got for the BL-Touch
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
20%
Filament: Prusament ASA Jet Black Post-Printing =============
I like to live dangerously
Category: 3D Printer Parts