Diabetes test equipment container
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€7.82 – €9.55 net (excluding VAT)
For file: Hinged Box v12_0.15mm_PETG_MK3S_9h52m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.69 excluding VAT (range midpoint).
- Weight reported by the author
- 90 g
- Print time reported by the author
- 9.87 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Container for holding diabetes testing equipment. Slot on side for attaching belt clip (clip from Minimed 630G).
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 27
- Makes
- 0
- Views
- 784
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution
Container for holding diabetes testing equipment. Slot on side for attaching belt clip (clip from Minimed 630G). Three partitions in the holder. The first slot holds a Contour Next Link Meter, the second slot holds lancet devise, the third slot holds test strips. The third slot is sized to hold two test strip containers from Diabetes Test Strip Container. https://www.printables.com/prints/207241-diabetes-test-strip-container
The belt clip is held in place with two 3mm diameter by 4mm long set screws.
The lid has print in place hinges and snaps shut.
Use supports for the lid when printing.
PETG was used so that if the container was left on the dash of a car and exposed to hot environment it would not melt or distort badly.