MakerGear M2 Simplify 3D Optimized Profiles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you have Simplify 3D and a MakerGear M2, here are optimized profiles that have quality without being slow. I…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 37
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
If you have Simplify 3D and a MakerGear M2, here are optimized profiles that have quality without being slow. I recommend the 0.2mm profile most of the time.
Turn support on if you need it.
Use ABS juice or (I prefer) Elmer's Glue stick for ABS and any color masking tape for PLA.
Note that this has temps for the latest v3 extruder which has the thermistor in the aluminum block rather than the nozzle. If you have an earlier model without an aluminum block, then you will want to subtract 20 degrees C from the hot-end temps.
Category: 3D Printers