Wand like Narcissa Malfoy had
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This wand is one of the cooler looking wands in my opinion. Currently files here need to be resized to 10% scale in X,…
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 225
- Makes
- 0
- Views
- 893
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
This wand is one of the cooler looking wands in my opinion. Currently files here need to be resized to 10% scale in X, Y, and Z. The slicer can do this. Sorry about that!
Print handle vertically and the wand tip horizontal. These will fit on an Ender 3 or Ender 5 bed (wand tip fits horizontal at an angle). Printing the tip horizontal makes it much stronger than printing it vertical.. I'd recommend printing each half by itself.
Note that it can be difficult to get the support off the handle without breaking the faceted end off so be very careful removing the support. Note that I later printed the handle vertically without using support and it came out excellent so I recommend not using support for the handle. Support will be needed for the tip printed horizontally though. The two halves are then glued together with super glue.
Note that I did not create the original but I improved the printing process. After some investigation, I believe the original is https://www.thingiverse.com/thing:3726655 so I think this a remix of that.
Enjoy!
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
25%
Filament: eSun PLA+ PLA white
Notes:
It would have been better to print in black and then add silver highlights to the handle similar to Narcissa Malfoy's wand.
Category: Toys & Games