1 / 3
Drill Guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Drill Guide for aligning a Drill at a 90° Angle to a Wall
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 204
- Makes
- 3
- Views
- 1,719
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A 90° Drill Guide with a Picture Frame Screw Hole at the bottom to hang it up and the possibility of embedding two 8x3mm Magnets ( requires a Pause Command to be inserted at the appropriate Layer Height )
Press Drill Guide Bottom against Wall ( or Object ) and Drill along Drill Guide Corner while keeping Drill Parallel against both Inner Surfaces of the Drill Guide.
Print at either 0.2 or 0.3mm Layer Height ( because of the position of the Magnets ).
HQ Render Image shows the Cross-Section View with the position of the Screw and Magnets.