Bedside Lamp (Box), LED 12V, 2.5W

Based on "PLAzzy, 12V LED Dog Lamp" https://www.prusaprinters.org/prints/20323-plazzy-12v-led-dog-lamp I designed this bedside lamp.

I have tried to capture the working steps and the assembly in photosl

For this project you will need:

1x … 64x64x3mm white polycarbonate glass, 70% translucency (or transparent polycarbonate glass or twin wall-sheet). I used polycarbonate glas -because of the more pleasant light.
1x … Ø 4x55mm from a threaded rod (or screw Ø m4 x 60 and saw of the screw head)
1x … Ø 4x45mm from a threaded rod (or screw Ø m4 x 50 and saw of the screw head)
2x … Ø m3x16mm + plus 2 matching washers (to connect head, neck and light base)
4x … wing nuts Ø 4 mm
10x … washers Ø 15x4,5mm
4x … self-tapping screws Ø 2,2 x 9,5mm

AC/DC Socket 5,5/2,1mm
4G bulb socket
4G bulb 2,5W/250Lm (IMPORTANT!: I do not advise the installation of a higher wattage bulb, because of too much heat development!)
12 V AC/DC power adapter

Soldering Iron
Solder

Video: https://youtu.be/mcLewjAtm3g

The files must be printed in the following number of copies:

1x BSL_LED Lamp_head.stl
1x BSL_LED Lamp_back.stl
1x BSL_LED Lamp_lightsocket.stl
1x BSL_LED Lamp_neck.stl
2x BSL_LED Lamp_leg.stl
2x BSL_LED Lamp_foot.stl
1x BSL_LED Lamp_spacerwasher.stl

After completion of the assembly I recommend - to improve the slip resistance - to attach small self-adhesive rubber pads to the bottom of the lamp feet (4x rubber pads Ø 8x1,6mm)

Print instructions

Category: 3D Printing Print Settings

Printer Brand: Prusa

Printer: i3 MK2S

Rafts: Doesn't Matter

Resolution: 0,2

Infill: 20%

Filament: Prusa PLA Galaxy Black, Silky Silver