Geometry bracelet / ring
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.33 – €0.40 net (excluding VAT)
For file: Pre-sliced print files for MK3S and Prusament PETG for example STLs / geometry_bracelet_ring_1-70mmid_8mmt_40mmw_3x20.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.36 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 29.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
OpenSCAD project that creates various customizable bracelet or ring models
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 109
- Makes
- 1
- Views
- 696
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- GNU General Public License v3.0
OpenSCAD project that creates various customizable bracelet or ring models
Print instructions
OpenSCAD project that creates various customizable bracelet or ring models. You can play with a lot of parameters to archive the desired look of your bracelet (see picture).
There are also ready-made STL files for two bracelets and one ring, both with 8 segments, 3 directional changes and 20 degrees of twist for each directional change.
Check it out on GitHub!
Print settings
Print with some (semi)transparent PETG filament with following settings:
- without infill
- 2 perimeters
- 5 top and bottom solid layers
Filament tips
I have tested following filaments, both bracelets and rings made from them look great and they are also UV reactive (glowing in UV light)!
There are other UV reactive filaments listed on Amazon, some tips (not tested):
- MG Chemicals Fluorescent Red / Hot Pink PLA
- Gizmo Dorks Fluorescent Yellow PLA
- Gizmo Dorks Fluorescent Blue PLA
Disclaimer: Some of the links above are affiliate links.