Triforce X Axis wheel for Anet or similar printer (Nema 17 5mm Shaft)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an X wheel for an Anet A8 or similar printer. It fits on the 5mm shaft of the Nema 17 motor that drives the X…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an X wheel for an Anet A8 or similar printer. It fits on the 5mm shaft of the Nema 17 motor that drives the X axis.
Back story...
I gave a printer kit I got off Ebay to a neighbor kid, who is friends with my youngest son.. He was very excited and built it to the best of his abilities..
I examined the printer and found a few flaws in the build and a few design failures in the printer (this was a $50 kit made of really cheap plywood and an almost exact clone of an Anet A8 except for the frame material) It had a poorly designed bed carrier that would hit the Y motor before hitting the end stop and the frame was very wobbly, so I printed some stiffeners and designed various other parts to allow it to work.
I knew the kid is a Zelda fan so I designed and printed this Triforce X axis wheel decoration for it..
Print Settings
Printer Brand:
Anycubic
Printer:
Photon
Rafts:
No
Supports:
No
Resolution:
0.07
Infill:
100
Filament: anycubic Resin White
Notes:
I printed this on an Anycubic Photon Zero.. but this would also print well on any FDM printer as well....
Just know that this is a very small print so small layer heights would be advantageous...How I Designed This
I used Designspark Mechanical to design this.. only took a few minutes to design and because of the resin printer it printed really fast too....
Category: 3D Printer Accessories