Rabbit - Sun Catcher
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to see if it was possible to print a sun catcher without fancy multilateral mechanisms.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 77
- Makes
- 1
- Views
- 440
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
I wanted to see if it was possible to print a sun catcher without fancy multilateral mechanisms. So here is one of my attempts. This time Rabbit from Winnie the Pooh.
The frame acts like the leading in a stained glass window. It needs to be printed in transparent filament with a change to black at the layer where the lead lines would be.
Once completed, the coloured pieces are then glued into the relevant "gaps" in the frame. I used PVA glue and allowed it to set over a number of days.
I used PLA for the filament, sometimes I had to use PET as I couldn't find a translucent/transparent PLA of the right colour. This mostly worked, but sometimes I had to sand the PET pieces down a little to make it fit.
Print instructions
Unassociated tags: sun catcher
Category: 2D Art Print Settings
Notes:
The Yellow and Black stl will need to be sliced so that the black outline of the frame continues round the piece.