Support / strain relief for the cable connector in Saitek X52 Hotas
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've always been a bit scared of bumping the din-connector and breaking something, now it's secure. For other format…
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 91
- Makes
- 1
- Views
- 636
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I've always been a bit scared of bumping the din-connector and breaking something, now it's secure.
For other format downloads (including original Fusion design) go to https://a360.co/2RA1wIP
Designed for M3 machine screws, I used 2.5mm drill for the holes with the cable and support in place, then removed cable&support, tapped the holes with M3 tap (but you could most likely just force the screw in and it will form it's own threads) and secured with screws and superglue.
Print Settings
Printer Brand:
MK3
Printer:
Prusa i3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
30% cubic
Filament: Colorfabb NGen Green How I Designed This ===================
In Fusion360 first make a model of the plug itself (measure diameters in various points with calipers, draw lines half that distance from the origin axis an make a revolve.
Then made a rectangle around the plug with a bit of clearance and screw holes, made back-end support sketch, did a bit of extruding, lightening and nicening.
Category: Hobby