1 / 5
Slide nut for 15x15x1,5mm profile
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slide nuts for 15x15x1,5mm aluminum profile, cheap C-beams idea.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
So I wanted to have U-beams on my cnc table to fix my wood, previously I was using inserts but those where annoying to work with.
I could have ordered some C-beams from amazon for 60 euro or make my own for 7 euro.
I used a 18mm MDF spoil-board milled out two 15mm slots, then placed in the square profiles and milled out the slots. The slots are divided in 2 to keep some strength in it. also on every end of the slot there is a hole where I can put these nuts in.
I still have to fix the profiles to the spoilboard with screws or glue.