Sk-go Bed frame stabilizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted my bed to stop shacking during fast small moves so I explored a few ways and this is the best and simplest…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 166
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I wanted my bed to stop shacking during fast small moves so I explored a few ways and this is the best and simplest I've found :)
It slides over the rail carriage screws so you don't need to undo them, you will have to undo the lead screw nut and use a longer M3 screw to put it back on. I used 12mm long M3s to fix the bracket to the metal L shaped on and 10mm m3s and washer with T nuts to fix it to the 2020 bed frame. You can use a magnet from the top of the 2020 to turn and slide the T-nuts in position....Overall a pretty simple addition to your Sk-Go :)
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.24
Infill:
30% Cubic
Filament: Atomic CF-ABS Carbon Fiber black
Notes:
I used 3 perimeters at 0.6mm extrusion width for strenght
Category: 3D Printer Parts