Square socket utility key
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.93 – €1.14 net (excluding VAT)
For file: Square socket utility key.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.04 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 1.3 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A basic key for utility/gas cupboards
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 148
- Makes
- 1
- Views
- 610
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A basic utility/gas/meter cupboard key with a square socket. Also used on some public bins. Has a decent thickness for the grip with a thinner section on one corner for easily putting on a keyring.
Print with a decent number of perimeters (4 or 5 for 0.4mm is good) and ~25% infill, should be strong enough for most latches unless they're really stiff.
Print upright as oriented, no supports needed as the top of the square socket void is topped with a taper.