NEMA 17 Stepper Mount for 1/2" EMT
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a NEMA 17 Stepper Motor mount sized for U.S. 1/2" EMT Tubing. I designed this for a Piper 2 CoreXY Extruder of…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 235
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a NEMA 17 Stepper Motor mount sized for U.S. 1/2" EMT Tubing.
I designed this for a Piper 2 CoreXY Extruder of my own design:
Belted Extruder v1 - https://www.thingiverse.com/thing:3289589
Belted Extruder v2 - https://www.thingiverse.com/thing:3384722
Photo's are of mounted Belted Extruder v2 design.
The mount design is long enough for a 48mm long stepper body such as the Zyltech 17HD48002H-22B Stepper: http://www.zyltech.com/nema-17-stepper-motor-1-7-a-0-59-nm-84-ozin-1-3-or-5-pack/ however it should fit any NEMA 17 just fine.
Use four #6-32 x 3/4" long machine screws and nuts to fasten around 1/2" EMT tubing. Screws can be fastened though mount or mount2 parts depending if you secure to stepper or EMT tubing first.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
35% Cubic
Filament:
Zyltech PLA
Black
Notes:
Print Orientation:
nema17\_emt\_mount.stl - stepper holes down on build plate with pipe interface going vertical.nema17_emt_mount2.stl - pipe interface going vertical as part shows in above viewer.
Category: 3D Printer Extruders