Piper 2 - Gantry Cable Chain
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wanted a clean way to route the gantry wiring of a Piper 2 printer. Cable chain is raised to be 5mm above the highest…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted a clean way to route the gantry wiring of a Piper 2 printer.
Cable chain is raised to be 5mm above the highest point of the gantry. Both Extruder and Gantry ends allow for bi-directional swinging so routed cables won't get into too tight of an arch when head is at max X/Y position.
Links are designed to be open for easy access to wiring
Clips pop in and keep the wires in place.
My bed size is 300mm x 300mm and I used 38 cable_chain_link parts and 38 cable_chain_clips.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament:
Zyltech PLA
Black
Category: 3D Printer Accessories