Dremel 2500-01 Multi Vise Clamp Head
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.49 – €1.82 net (excluding VAT)
For file: clamp-head-for-dremel-2500-01-multi-vise_02mm_p.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.65 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 1.79 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The head of the clamp mechanism on my Dremel 2500-01 Multi Vise snapped off so I remodeled it.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 27
- Makes
- 1
- Views
- 576
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The head of the clamp mechanism on my Dremel 2500-01 Multi Vise snapped off so I remodeled it.
Print instructions
Printed in PETG with 5 perimeters for strength. I printed the main head with 15% infill but put a modifier in Slic3r to give the stem 100% infill. The gcode has this modifier in place already.