Waschbecken Stöpsel für M6 x 40 Schraube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Washbone plug for M6 x 40 screws
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 97
- Makes
- 0
- Views
- 632
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Waschbecken Stöpsel
Passend für die meisten Waschbecken.
Hierzu wird noch eine M6x40 Schraube benötigt (Typ ist egal 6kt, Schlitz oder Kreuzschlitz) die ihre Grundeinstellung ungefähr 25mm über dem höchstem Punkt (gemessen vom Kreutz aus) hat.
Wer keine M6 Schraube zur Hand hat oder besorgen möchte kann sich die Version 2 die eine Schraube enthält hier runterladen.:
https://www.printables.com/de/model/212264-waschbecken-stopsel-v2-mit-stellschraube
Hierzu wird noch ein O-Ring mit den Maßen d34 mm x d3 mm benötigt.(möglichst weich).
------------------------------------------------------------------------------------------------------
Google translates:
Sink plug
Fits most sinks.
An M6x40 screw is required for this (type does not matter: hex, slotted or Phillips) which has its basic setting about 25mm above the highest point (measured from the cross).
If you don't have an M6 screw at hand or don't want to get one, you can download version 2, which contains one screw, here:
https://www.printables.com/de/model/212264-washbasin-stopper-v2-with-adjusting-screw
An O-ring with the dimensions d34 mm x d3 mm is required for this.(as soft as possible).