Dial Indicator Stem Conversion Sleeve
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.13 – €0.15 net (excluding VAT)
For file: Lathe_Dial_Indicator_Sleeve_0.15mm_Inland_PETG_MK3S_11m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.14 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 10.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Converts the dia of the mounting stem from 8mm to .375 inches.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 29
- Makes
- 0
- Views
- 291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Converts a dial indicator stem diameter from 8mm to 0.375 inches. This allows dial indicators with a 8mm dia to be mounted in 3/8 dia holding devices. Allow contains a hole for a nylon set screw to index stem to hold dial indicator/sleeve in place.
Printer: MK3s, Filament: Inland PETG Red. Slicer settings: Default for PETG.