1 / 3
Anycubic 4Max Pro Internal Spool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print parts at last in PETG, or better in ABS - ASA. You will need 1x M3 10mm and 1x M3 8mm. If you use this spool…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 33
- Makes
- 0
- Views
- 329
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Print parts at last in PETG, or better in ABS - ASA. You will need 1x M3 10mm and 1x M3 8mm.
If you use this spool holder https://www.thingiverse.com/thing:2451368 you can put the spool into the chamber, using the heat of the chamber (about 50-55 degrees with the heated bed at 100) for spool preheat. It can be usefull with some materials that needs a preheat for better results.
Category: 3D Printer Parts