Self-Draining Geometric Soap Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.51 – €3.07 net (excluding VAT)
For file: CE3PRO_SoapHolderTopV1.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.79 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 3.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Soap sticking to your sink? Print this holder to keep your soap from sticking and also extend its life!
- Rating
- 5 / 5
- Likes
- 85
- Downloads
- 393
- Makes
- 6
- Views
- 1,722
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Introducing the Geometric Soap Holder!
This model doubles as two soap holders in one! Otherwise, they can be used together for a more pleasing experience.
Print Settings
- Keep layer height relatively low to achieve proper curves/slopes for the drainage. I used 0.12 in the .gcode file provided
- No supports are needed
- Infill is what ever you desire. I used 20% in my file.
Notes:
Feel free to leave a comment for any suggestions. Happy printing!
Make Cover Picture credit to Megatech!