1 / 2
Prusa i3 MK3+ Extruder Visualizer 8x8 Magnet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple extruder visualizer that uses 8x8 mm magnet
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 55
- Makes
- 3
- Views
- 441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Created this simple extruder visualizer for 8x8 mm magnets, since I had these magnets laying around.
Magnet simply is pushed into the central recess.
Inner diameter in CAD is 8.1 mm, which is a good friction fit on my settings. If yours is too tight or loose, simply scale the model to adjust the inner diameter that holds the magnet.
| OD | ID | Scale % |
| 34.48 | 7.98 | 98.5% |
| 34.65 | 8.02 | 99.0% |
| 34.83 | 8.06 | 99.5% |
| 35.00 | 8.10 | 100.0% |
| 35.18 | 8.14 | 100.5% |
| 35.35 | 8.18 | 101.0% |
| 35.53 | 8.22 | 101.5% |
| 35.70 | 8.26 | 102.0% |
| 35.88 | 8.30 | 102.5% |