1 / 4
PC4-M10 Bowden Guide 2020 Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printing completely solid only takes up to 3m of filament! Two walls with a 0.4mm width takes 1.3m of filament!
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 118
- Makes
- 2
- Views
- 730
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
A quick print to rigidly mount a bowden or reverse bowden tube to 2020 series extrusions.
I recommend using a socket to thread the coupler into the mount.
PARTS LIST
1x M3x8mm SHCS
1x M3 Hammerhead or Roll-in 2020 tnut
1x PC4-M10 Bowden Coupler
PRINT SETTINGS
No supports
0.1mm to 0.15mm layer height recommended
2-3 shells
20% infill
Takes about 1.3m of filament with these settings, provided MK3S file is about 1.6m of filament