1 / 2
RAPT Controller Retrofit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
This design was used to convert my old Brewpi fermentation chambers into RAPT compatible fermentation chambers. I use the 2m temp probe extension from kegland and a 1a led driver to power the unit.
You will need :
4 M3 square nuts
4 M3x10 screws
1 cable tie for cable retrention