1 / 3
PrintABlok Vase Mode Connector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tiny connector alternative for printablo k
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 122
- Makes
- 3
- Views
- 544
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial
The standard PrintABlok connector's success is largely tied to the material it was developed for (PLA) and the scale that it's printed at. So, if you need a connector that works at a different scale or with a different material, you need to get a little clever with slicer settings.
This connector was designed specifically to work with vase mode-like print settings.
- 0% infill
- 0 top and bottom layers
- 1 shell (for PLA or PETG)
If you're using a more flexible material like TPU or ninjaflex you can increase the shells to 4 and these connectors will still work.