MASE Front Open - MiSTer Attached SATA Enclosure for MiSTer FPGA consoles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of Retrofrog`s MASE to use another USB to SATA adapter that i had laying around. Using the front USB port.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 67
- Makes
- 2
- Views
- 933
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
A remix of MASE to use the USB → SATA adapter that i had laying around here.
All that i did I just cut the front to hold the adapter and closed the side hole on the original design.
Link SATA adapter 3.0 (choose 3.0 on the box) → https://bit.ly/3yQUBn2
It holds firmly the adapter just snapping in the place and still hot swaps perfectly.
Again an amazing job from RetroFrog.
Use the same instructions from the original design to mount. In my case i used the MisterAddons aluminium case and used the same screws to attach the top modified part.
Printed with 20% infill and 0.2 resolution, using PLA.
This is my first remix that i published, if you need something just comment here.
Cheers!