3M 6000 Series Mask Filter - Square
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This collection will make an exhaust filter for the 3M 6000 Series face masks. The 70mm x 70mm square filter is easy…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 333
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This collection will make an exhaust filter for the 3M 6000 Series face masks.
The 70mm x 70mm square filter is easy to cut, absorbs moisture, and provides minimal restriction for breathing.
The Mask Clip snaps into the Exhaust Cover. The seal is almost air tight, but you can run some superglue or plastic cement along the seam for a 100% airtight seal.
The latest version has an improved clip, allowing for easier removal of the exhaust filter.
Print Settings
Printer:
Sainsmart Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
100%
Filament:
Any PLA
Any
Notes:
Prints fine at .2mm w/o supports.
With good bed adhesion, you can get by with a skirt.Category: Other