1 / 2
Mesa card DIN rail adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapts from a generic DIN rail clip (three holes 0.5"/12.7mm hole spacing) to Mesa interface cards (94mm hole spacing)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 44
- Makes
- 0
- Views
- 503
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Adapts from a generic DIN rail clip (three holes in a line, 0.5"/12.7mm spacing) to Mesa interface cards for my CNC machine conversion (94mm hole spacing).
Prints without supports but needs bridging on the top, the best solution I found was to use only 1 or 2 vertical shells/perimeters, which forces the bridging start/end points to be anchored better in PrusaSlicer. YMMV with other slicers.