RODE Procaster Microphone dust cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of FDMBRO's NT-USB Dust Protector, modified to fit the end of a Rode Procaster micophone.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 41
- Makes
- 0
- Views
- 606
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
Summary
A remix of FDMBRO's NT-USB Dust Protector modified to fit the Rode Procaster microphone without a wind\popshield.
Print Settings
Printed on a Prusa Mini - from the flat end (with the mic logo) up in PLA with the standard 0.2mm quality profile in Prusa Slicer. Print time approximately 3.5 hours.
If working with the .stl you may need to hit the autorepair - theres some gaps in there that I've not tracked down.
The bevel on the end may be too steep as mine appears to be a bit messy, but this could be due to old filament and possibly some stray fragments in the print.