Relaxing soap
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.07 – €0.09 net (excluding VAT)
For file: c-rings_0.25n_0.15mm_PLA_MK3S_5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.08 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 4.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Relaxing soap
- Rating
- 4.75 / 5
- Likes
- 1,125
- Downloads
- 2,476
- Makes
- 27
- Views
- 14,584
- Reviews
- 28
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Prichádza čas dovolenky, takže vytvorme atmosféru odpočinku a relaxácie
In the 3mf part of the hammock, set the number of upper and lower layers to 0 and the value of the infill to 8-10%, the shape of a straight line and 3 perimeters
Update !!- Added parts in stl format
ATTENTION: fixed 3mf hammock, g.code hammock is ok
Based on this model, I created another similar stand for remote controls :
https://www.printables.com/cs/model/314942-design-stand-for-remote-controls