Prusa Mini Raspberry Pi Square Camera Mount + No Supports X Axis Strain Relief
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.18 – €1.45 net (excluding VAT)
For file: raspicam v4_0.2mm_PETG_MINI_1h23m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.32 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 1.39 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I fully remixed TinkrMakr original file (thx for .step) to a compatible design for square camera + some improvements
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 78
- Makes
- 7
- Views
- 581
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you want, check my other new design here, now with adjustable view!
----------------------------
Hi all, I've bought a Pi cam from Aliexpress but it wont fit so i fully remixed TinkrMakr's original file (thx for .step file) to a compatible design for square camera's + some addons: now you don't need supports at all for the X axis stress relief and even if your printer tolerance are different than mine you can secure the camera mount to the X motor thanks to 2x zip ties. Also, I gave it a more "squared" design and slightly increased the size of the pins, now it stays in place without using tape. Feel free to ask if you have problems.
BEFORE PRINT: measure thickness from back to the ribbon cable, if it's more than 3.90 mm THE MODULE WON'T FIT! DON'T WASTE FILAMENT!
You only need x3 zip ties
Printed in PETG and 0.20 SPEED stock profile with variable height
This is the pi cam module i used:
