MMC60 Switch
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.06 – €0.07 net (excluding VAT)
For file: RFS_Pins_0.2mm_PLA_MK3S_3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.06 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 3 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A cost-effective 3D printable accessibility switch for people with physical disabilities.
- Rating
- 5 / 5
- Likes
- 71
- Downloads
- 556
- Makes
- 3
- Views
- 3,455
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Share Alike
The MMC60 Switch is a cost-effective accessibility switch, an assistive device used by people with physical disabilities to control electronics (e.g. phones, computers, adapted toys, game controls, etc.).
This switch is ideal for people who have difficulty with fine motor control. The flexure in the design allows the user to press, hit, or smash on the switch with a high degree of force.
The top button / activation surface is attached to the base by threading it on. This makes it easy to change tops to change color, labels, etc.
Print Settings
Infill: 20%
Resolution: 0.2mm
Supports: No
Rafts: No
Bill of Materials
To assemble the switch, you will need:
1 – 3D Printed Base Bottom
1 – 3D Printed Base Top
1 – 3D Printed Flexure
1 – 3D Printed Button
1 – 3D Printed Switch Mount
1 – 3D Printed Pins
1 – Microswitch (Omron SS-3GP)
1 – Mono Jack (CUI MJ3502)
1 – 1/4″-20 UNC Hex Bolt, 1/2″ Length
2 – 1/4″-20 UNC Hex Nut
1 – 1/4″-20 UNC Tee Nut Insert, 5/16″ Length
5 – #4 Metal Screw, 3/8″ Length
2 – 4 cm length 22 AWG wire
Build Tutorial
Printed assembly manual can be found in the Files tab.
Button Customization Tutorial
https://makersmakingchange.com/customizing-switch-buttons/
Additional Documentation
https://makersmakingchange.com/project/mmc60-switch/
About Makers Making Change
Makers Making Change is an initiative of the Neil Squire Society, a Canadian non-profit that empowers people with disabilities through technology.
We leverage the capacity of community based Makers, Disability Professionals and Volunteers to develop and deliver affordable Open Source Assistive Technologies.
🔸 Volunteer to print a device
🔸 Tackle a design challenge
🔸 Submit an assistive device idea