Light Proximity Switch
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.51 – €0.63 net (excluding VAT)
For file: Light_Proximity_Switch_Bottom_Case_v1.0_0.2mm_PLA_MK3S_32m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.57 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 31.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A cost-effective 3D printable accessibility switch for people with physical disabilities.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 33
- Makes
- 1
- Views
- 379
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Share Alike
The Light Proximity Switch is a cost-effective accessibility switch, an assistive device used by people with physical disabilities to control electronics (e.g. phones, computers, adapted toys, game controls, etc.).
The switch is well-suited for use by small movements of a finger or larger gross movements of a hand or limb. It can be plugged into any standard 3.5 mm AT interface and even the Xbox Adaptive Controller. The switch has a removable base so it can more easily be positioned to access small movements.
Print Settings
Infill: 20%
Resolution: 0.2mm
Supports: Yes (only for the Switch Top Case)
Rafts: No
Bill of Materials
Find the bill of materials, PCB file, and additional documents on https://github.com/makersmakingchange/Light-Proximity-Switch
Build Tutorial
Printed assembly manual can be found in the Files tab.
About Makers Making Change
Makers Making Change is an initiative of the Neil Squire Society, a Canadian non-profit that empowers people with disabilities through technology.
We leverage the capacity of community based Makers, Disability Professionals and Volunteers to develop and deliver affordable Open Source Assistive Technologies.
🔸 Volunteer to print a device
🔸 Tackle a design challenge
🔸 Submit an assistive device idea