1 / 11
The Ant (holder for 7 g.SAHARA EEG electrodes) — image 1
1 / 11

The Ant (holder for 7 g.SAHARA EEG electrodes)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An EEG electrodes holder for a basic 7-electrode EEG setup using g.SAHARA electrodes. This is my entry in the Ars…

Rating
0 / 5
Likes
4
Downloads
22
Makes
0
Views
412
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Public Domain

An EEG electrodes holder for a basic 7-electrode EEG setup using g.SAHARA electrodes.

This is my entry in the Ars Electronica 2017 Br41n.IO hackathon, awarded the second place.

A result of ~6 hours of design, it is still quite rough around the edges, but a good starting point for further refinement. I have attached the STEP file if you want to play with it. The decorative legs are aligned with the electrode placement lines, so it is easy to add additional electrodes.

A big Thank You to the entire hackathon team, it was a lovely experience to be a part of! :)

Print Settings

Printer:

Any PLA-capable printer

Rafts:

Yes

Supports:

Yes

Resolution:

0.2 mm

Infill:

15%


Notes:

Print one of each. Turn the head, body and tail around to cut down on the need for supports.

Post-Printing =============

Clean up the printed parts and connect the hinges using M4 screws and nuts. Add a drop of superglue onto the tightened nuts to prevent them from unscrewing. Place rubber bands on the pointy rubber band holders so the parts are pushed inwards toward the head.

How I Designed This

In Fusion 360 I made an ellipsoid as a stand in for the more complex head shape—in the area of the electrodes it is a good-enough approximation considering the adaptive design with rubber bands. I then designed a simple holder for the g.SAHARA electrode, cloned it and placed it on the appropriate places on the head. I then built the ant body parts around these, creating the general look I was going for. In the end, I added hinges to hold everything together. The process is easiest to explain if you look at the video.

Category: Other

Tags