1 / 2
Flexible Manometer Protector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple sleeve to put on a manometer to protect it from bumps. Should be printed with flexible material to be able to…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 34
- Makes
- 0
- Views
- 219
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
A simple sleeve to put on a manometer to protect it from bumps. Should be printed with flexible material to be able to put it on. Manometer diameter is 62 mm, depth is 30 mm. Scale as needed.
Print Settings
Printer:
Craftbot
Rafts:
No
Supports:
Yes
Resolution:
0,2 or 0,3 mm
Infill:
15%
Notes:
Use a flexible filament, you will not be able to put it on otherwise. I used Filaflex myself, but should work with anything rubberlike. Position with the back down. Supports are only needed for the little hole.
Category: DIY