1 / 8
KFB 2.0 Controller Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple and robust housing for a KFB 2.0 Controller. It will coincidentally fit as a controller housing on a…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 21
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a simple and robust housing for a KFB 2.0 Controller.
It will coincidentally fit as a controller housing on a Renkforce RF500 (it was originally designed with this printer in mind).
Measurements:
- housing approx. 114x149x75mm (with mounted fan)
- 4 mounting holes provided (for 4-5mm screws): hole distance x=87mm and y=117mm
Please refer to the mockup for further information and assembly.
Additional parts needed:
- 80mm fan with 8 mounting screws
- 4 x 3x8mm screws to mount the KFB 2.0 board
- 4 x 3x8mm screws if you optionally want to fasten the cover (it is designed to be snap-on)
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Infill:
at least 25% for smooth surface
Category: 3D Printer Accessories