Soap dish for a corner shower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Soap dish for a corner shower. Two versions to screw and glue on.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 106
- Makes
- 2
- Views
- 855
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
Object description.
This is a soap dish for a corner shower.
Version 1 can screwed on the tiles on the wall.
In case you are not allowed to make bore holes into the tiles you can use version 2 which can be simply glued on.
If you need a specific bore distance to use existing bores, please send me a message.
Update 2022-06-13:
Model “Soap_dish - glue on doublesided” with two gluing surfaces added.
Main dimensions:
After screwing the dovetail part to the wall, you can move the soap dish 5 mm to either side to be guaranteed free of play on the wall.
Print recommendations:
The 3mf-file for the soap_dish includes already a paint-on support in each corner.
Between the bars you normally don't need support. In worst case paint some single spots between the bars as shown here:
If you want to make a testprint first, you can find a testpiece in the download section.
For a better strength, print the hanger in upright position as suggested. Support shouldn't be necessary. In case you need one, use the paint-on function to mark the upper wall of the dovetail.
Preparing the parts for the screw on version 1:
Melt a M3 thread insert into the hanger.
Melt two M3 thread inserts into the soap dish.
Assemble parts as shown below.
First screw the dovetail part on the wall with two countersunk screws dia. 3,5mm.
Screw the hanger on the soap dish with the two M3x15 hexagon socket head screws.
Put the hanger on the dovetail part and tighten carefully the M3x10 hexagon socket head screw from the bottom side.
Finished and equipped :-)
Preparing the parts for the glue on version 2:
Just put an adhesive stripe 80mm x 20mm on the hanger and glue it on the tile.
Parts list for the screw on version:
- 2x Countersunk screws dia. 3,5mm x length depending on the length of your dowels
- 3x thread insert M3
- 1x Hexagon socket head screw M3 x 10 (stainless steel)
- 2x Hexagon socket head screw M3 x 15 (stainless steel)
Print settings:
Material: PC or ABS. Do not use PLA. It will deform under high water temperatures over the time.
Layer height: 0,2mm or smaller
Infill: ~50%
Perimeters: 4
Brim: no
Support: already included in the model