Open Rocker Switch
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.28 – €0.34 net (excluding VAT)
For file: ORS_Divider_0.2mm_PLA_MK3S_18m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.31 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 18 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A cost-effective 3D printable accessibility switch for people with physical disabilities
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 35
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Share Alike
The Open Rocker Switch is a cost-effective accessibility switch, an assistive device used by people with physical disabilities to control electronics (e.g. phones, computers, adapted toys, game controls, etc.).
The switch consists of two separate switches that are activated by pressing on either side of the top rocker. The switch has two 3.5 mm mono cables to carry the two signals, which can be plugged into two separate devices.
Print Settings
Infill: 20%
Resolution: 0.2mm
Supports: No
Rafts: No
Bill of Materials
Find the bill of materials and additional documents on https://github.com/makersmakingchange/Open-Rocker-Switch
Build Tutorial
Printed assembly manual can be found in the Files tab.
About Makers Making Change
Makers Making Change is an initiative of the Neil Squire Society, a Canadian non-profit that empowers people with disabilities through technology.
We leverage the capacity of community based Makers, Disability Professionals and Volunteers to develop and deliver affordable Open Source Assistive Technologies.
🔸 Volunteer to print a device
🔸 Tackle a design challenge
🔸 Submit an assistive device idea