1 / 3
GPU Simple Sag Support Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This two piece print uses a screw to adjust height anywhere from a 90mm to 55mm gap between the GPU shroud and the case.
- Rating
- 4.818 / 5
- Likes
- 101
- Downloads
- 1,595
- Makes
- 13
- Views
- 7,214
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This two piece print uses a screw to adjust height anywhere from a 90mm to 55mm gap between the GPU shroud and the case.
Update: A few printers have expressed that the threads are tight. Be aware, depending on your print settings, you may want to add an extra off set to either piece for a better fit.