Chess Figure Set Dubrovnik [FIDE-Kingsize 3.75"] - mod easy-to-print [for a board with 2x2 inch / 50mmx50mm fieldsize]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Chess Dubrovnik Set - mod easy-print Kingsize 3.75" (FIDE) (for a board with 2x2 inch / 50mmx50mm fieldsize)
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 435
- Makes
- 6
- Views
- 1,612
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Chess Dubrovnik Set - mod easy-print Kingsize 3.75" (FIDE)
(for a board with 2x2 inch / 50mmx50mm fieldsize)
Chess #Dubrovnik #Staunton
////////////////////////////////////////////////////////////////////////////////
The set - except of the knight - is a remake (redrawn in Fusion360) of the "Classic Dubrovnik Chess Set".
To make it 3D printable in an easier way, i slightly modified the overhangs with slopes at 50deg angles.
The print needs very few support material - you'll see.
The figures are hollowed out a bit to allow the insertion of metal rods or balls + resin.
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The Knight is from::
https://cults3d.com/en/3d-model/game/chess-set-dubrovnik-1950
Have fun!
///////////////////////////////////////////////////////////
https://www.paypal.com/paypalme/satch5150
///////////////////////////////////////////////////////////